Series 2000 Pressure and Level Transmitter
The Series 2000 is a complete range of intelligent pressure and level transmitters with local display and adjustment by three push buttons. The push buttons are used to set Zero and Span. Test pressures are not required for calibration.
Industries
- Pulp and Paper
- Food and Beverage
- Chemical
- Pharmaceutical
- Clean liquids, gases and vapours
Product: CER-2000
Principle of Operation
The display which can indicate a number of chosen engineering units is also used during programming to assist the easy operation.
Process temperatures can be shown and damping times can be adjusted from 0 to 25 secs. Also a 4-20 mA Current Simulation can be performed. The Series 2000 is fully temperature compensated. Over 40 different process connections are available including many flush diaphragm designs.
Certifications
ATEX approval, HART¬ protocol or PROFIBUS-PA output.
- ÓAll StainlessÓ design
- Easy calibration without test pressure by 3 push buttons
- Accuracy 0.1%
- 4-20 mA and HART¬ protocol
- ATEX II 1 G and II 1 D
- Wide rangeability
- Local display
- Bypass
- Basin
- Stilling Well
- Sewage Plant
- Other
Accuracy: 0,1% of adjusted span
Measuring Range: 0 - 0,1 bar to 0 - 100 bar
Process Temperature: -20°C to +80°C (Option: 100°C)
Power Supply: 12-36 VDC (Exi: 13-26.5VDC)