OptioLaser L100 for Level, Distance and Position Measurement of Solids and Liquids (up to 50m/164ft)
The OptioLaser L100 is a non-contact laser sensor used to measure the distance to solid and liquid surfaces, slurries or murky water. Solid surfaces can be anything from a at metal plate on the side of an overhead crane, to the top of material stored in a silo. With an easy to use menu system, the OptioLaser can be configured for either distance or level measurement and the high accuracy, long range and fast update rate make this the ideal sensor for many different applications.
Industries
- Plastic Pellets
- Mining
- Water
- Waste water
- Chemicals
- Processing
- Food
- Beverage
Product: L100
Quantity
Add to Quote Cart
Principle of Operation
The OptioLaser L100 is a non-contact laser sensor used to measure the distance to solid and liquid surfaces, slurries or murky water. Solid surfaces can be anything from a at metal plate on the side of an overhead crane, to the top of material stored in a silo. With an easy to use menu system, the OptioLaser can be configured for either distance or level measurement and the high accuracy, long range and fast update rate make this the ideal sensor for many different applications.
- Non-contact measurements with laser technology
- 303 stainless steel housing
- Measurement range up to 50m (164ft)
- Continuous measurement with a resolution of 10mm
- NAMUR compliant 4-20mA output
- 2 normally open relay outputs
- Easy configuration via USB
- Shaft
- Bypass
- Basin
- Stilling Well
- Sewage Plant
- Other
- Tank or Vessel
Accuracy: <0.1% of full range at 20ºC (68ºF)
Maximum Range: up to 50m (164ft)
Operating Temp: -20ºC to 60ºC (-4ºF to 140ºF)
Resolution: 10mm (0.39in)