MEMFlo MFTV Process VA Flow Meter
The MEMFlo MFTV Metal Bodied Flow Meters with Clear Top are simple, accurate, meters for use in a wide range of industrial liquid and gas applications. These meters have an excellent tolerance to suspended solids and measure flow to one percent accuracy. Unlike tapered tube rotameters, MFTV flow meters have an indicator disk in close proximity to the edge of the sight tube for visibility even in many dirty fluids. These meters can be supplied with the MFT2 2-Wire Flow Transmitters for flow rate and total.
- Cooling water
- Compressed Air
- Nitrogen, oxygen, argon, carbon dioxide and other gas flows
- Light oils
Principle of Operation
MEMFlo MFTV Metal Bodied flow meters are patented variable area flow meters using the the volumetric principle of flow measurement. These meters consist of five main parts including the body/measuring tube, core tube, float assembly, scale, and pitot tube. The meter is not a glass tapered tube, rather the media enters the meter vertically at the bottom inlet port and flows upward into the core tube. Then the media flows horizontally through the core tube slot and exits the meter through the side outlet port. During this process the media lifts the float assembly in the core tube in direct proportion to the rate of flow. The slotted core tube design gives the meter an excellent tolerance to suspended solids and there are no springs, cams, or dynamic seals to wear out.
- Tough, simple, & accurate meters for water, oils, coolants, compressed gases, lubricants, mild slurries & other general industrial applications.
- Excellent tolerance to suspended solids.
- Extended flow ranges averaging 30 to 1.
- Disassembles in less than a minute without removing the meter from the pipeline.
Repeatability: 1/2” to 1½”: +/- 1/4% of indicated flow rate 2” to 4”: +/- 1/2% of indicated flow rate
Rangeability: 30 to 1 average
Accuracy: ± 1% of 100% flow rate
Pressure Rating: Up to 300 PSIG *Optional 600 PSIG