OptioLaser S200 Laser Sensor
The OptioLaser S200 Laser Sensor can be used for blockage detection, barrier detection, machine detection and stock pile monitoring and point level measurement. Typical applications consist of block chute detection, stockpile monitoring, tank and silo level, collilsion detection and truck or machine detection.
- Asphalt and Cement
- Food & Beverage
- Mining & Metals
- Oil & Gas
Principle of Operation
The OptioLaser S200 series offers an optional visible alignment laser, RS232 and 4-20mA outputs. It uses an infrared semiconductor, GaAs laser diode. A light energy wavelength of approximately 905 nanometers, with a beam divergence of 3 milliradians (equal to 3ft at 1000ft), travels to the material being measured.
Any solid or liquid target in its path, will reflect back a certain percentage of the emitted energy. The OptioLaser calculates the distance, based on the transit time the laser pulse travels to the material and back.
- Non-Contact measurements without frequent calibrations
- Easily identifies difficult targets
- Measuring range up to 1,600m (5,249ft) for natural targets
- Ruggedized Enclosure
- Targeting of the laser with optional alignment laser
- Collects level data as often as you need it
- Sewage plant
- Tank or Vessel
Accuracy: +/- 49cm (1.6")
Maximum Range: 1.600m (5,429ft), non-reflective target
Operating Temp: -28¼C to 50¼C (-20¼F to 140¼F)
Approvals: Type 4x, IP66